Gas and Electric Water Heaters Compared

Gas Water Heater vs Electric: The Sydney Showdown

Walk into any street in Sydney’s south and half the neighbours will tell you gas is the only way to go. The other half are still running electric and reckon they are paying less. Both sides have a point.

At EKORP Plumbing (Lic 322223C), we install and fix both types all across Sydney’s Southern Suburbs. We have seen plenty of real energy bills. Here is the actual breakdown: install costs, running costs, lifespan, and which one suits your place.

Installation Costs: Gas vs Electric in Sydney

The purchase price of the unit is only part of what you pay upfront. Labour, compliance fittings, and any site upgrades all add to the total. Here is how the two systems stack up in the real world.

Electric Water Heater Installation (Standard Storage)

• We inspect the job and confirm the price before work begins.
• Time on site: typically 3 to 4 hours

Electric is the cheaper option to install, especially if you already have a compatible setup and just need a direct swap. Minimal site work, no gas line to worry about.

Gas Water Heater Installation (Instant or Storage)

• Time on site: 4 to 8 hours depending on complexity
• Common extras: gas line upgrade, outdoor wall mounting, or a new electrical point for ignition

Gas costs more upfront, particularly when switching from electric. If there is no gas connection on the property, factor that in too. EKORP always checks site conditions before quoting so there are no nasty surprises on the day.

Running Costs: What You’ll Pay Year to Year

Installation is a one-off hit. Running costs chip away at your wallet every single day. Here is what the numbers look like for Sydney households at current energy prices.

Average Electric Storage Running Costs (Sydney)

• Watch out for: heat loss from a storage tank sitting idle, especially in winter

Electric storage works well for low-use homes. For larger families, the costs climb quickly, and any rise in electricity rates hits you directly.

Average Gas Continuous Flow Running Costs (Sydney)

• Worth noting: continuous flow only heats water when you turn the tap, so there are no standing losses

Gas runs cheaper for most mid-size to large households. Sydney gas pricing also tends to move around less than electricity rates over time. One thing to keep in mind: continuous flow is less economical if your household takes very short showers throughout the day.

If your current electric system is more than ten years old, you are almost certainly paying more than you need to. Our guide on repairing versus replacing walks through the numbers. A modern replacement, gas or electric, will bring those running costs down noticeably.

Lifespan, Repairs and Maintenance: Which System Lasts Longer?

A lower sticker price today does not help if you are replacing the system years ahead of schedule. Here is how both types hold up in the field.

Electric Hot Water Systems

• Average lifespan: 8 to 12 years
• Common faults: thermostat failure, heating element burnout, anode corrosion
• Risk to note: tank failure usually means a full system replacement, which can leave you without hot water for days

Electric systems have fewer moving parts, which makes components easier to source. The trade-off is that tank corrosion can take the whole unit out with little warning.

Gas Hot Water Systems (Continuous Flow or Storage)

• Average lifespan: continuous flow 12 to 20 years, gas storage 8 to 12 years
• Common faults: gas valve wear, ignition problems, internal scale build-up in hard water areas
• Worth knowing: many gas systems, particularly continuous flow units, can be repaired rather than replaced mid-life

EKORP Plumbing performs more gas water heater repairs than replacements, especially on continuous flow models. Serviced every two to three years, these systems regularly outlast their electric equivalents. Gas work must be carried out by a certified plumber, so do not try to DIY this one.

The Verdict: What’s Right for Your Sydney Home?

There is no single winner here. The right choice comes down to how many people are in your home, what connections you already have, and how long you plan to stay in the property.

Choose Electric If:

• You live alone or with one other person
• You want the lowest possible upfront spend
• The property has no gas connection
• You have access to off-peak electricity tariffs
• You want the simplest installation with the least site disruption

Choose Gas If:

• You want to lower your ongoing energy bills over the years ahead
• Your current electric system keeps failing and you want a more durable option
• Natural gas is already connected at the property
• You want a system that can be serviced and repaired rather than replaced

Still on the Fence?

EKORP Plumbing (Lic 322223C) serves Sydney’s Southern Suburbs including Hurstville, Kogarah, Rockdale, Miranda, Caringbah, and surrounding areas. We can check your current system’s condition, compare running cost projections based on your actual usage, confirm gas availability at your property, and give you a same-day quote for a new installation or repair. No sales pitch. Straight advice that saves you money.

Call EKORP Plumbing on 02 8667 5354 to book a hot water consultation or get a quote.